Bellingham Airport SW Detention Pond #3 Dam is located in Washington. It was built in 2011 for the purpose of flood control.
The dam is owned by the local government.
Bellingham Airport SW Detention Pond #3 Dam is owned by the local government.
|Dam length||730 feet|
|Dam height||8 feet|
|Structural height||8 feet|
|Hydraulic height||8 feet|
|Max storage||44 acre feet|
Length of the dam is defined as the length along the top of the dam. This also includes the spillway, powerplant, navigation lock, fish pass, etc., where these form part of the length of the dam. If detached from the dam, these structures should not be included.
Height of the dam is defined as the vertical distance between the lowest point on the crest of the dam and the lowest point in the original streambed.
Structural height of the dam is defined as the vertical distance from the lowest point of the excavated foundation to the top of the dam. Top of dam refers to the parapet wall and not the crest.
Hydraulic height of the dam is defined as the vertical difference between the maximum design water level and the lowest point in the original streambed.
Maximum storage is defined as the total storage space in a reservoir below the maximum attainable water surface elevation, including any surcharge storage.
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
An emergency action plan is defined as a plan of action to be taken to reduce the potential for property damage and loss of life in an area affected by a dam failure or large flood.
Inspections are every 5 years.
|NID ID (National ID)||WA02040|