Burns Reservoir Dam is an earth dam built on the Martin Branch River and is located in Texas. It was built in 1949 .
The dam is privately owned by TE Burns.
Burns Reservoir Dam is privately owned by TE Burns.
|Dam length||2,400 feet|
|Dam height||20 feet|
|Structural height||20 feet|
|Hydraulic height||20 feet|
|Max storage||1,732 acre feet|
|Normal storage||595 acre feet|
Length of the dam is defined as the length along the top of the dam. This also includes the spillway, powerplant, navigation lock, fish pass, etc., where these form part of the length of the dam. If detached from the dam, these structures should not be included.
Height of the dam is defined as the vertical distance between the lowest point on the crest of the dam and the lowest point in the original streambed.
Structural height of the dam is defined as the vertical distance from the lowest point of the excavated foundation to the top of the dam. Top of dam refers to the parapet wall and not the crest.
Hydraulic height of the dam is defined as the vertical difference between the maximum design water level and the lowest point in the original streambed.
Maximum storage is defined as the total storage space in a reservoir below the maximum attainable water surface elevation, including any surcharge storage.
Normal storage is defined as the total storage space in a reservoir below the normal retention level, including dead and inactive storage and excluding any flood control or surcharge storage. For normally dry flood control dams, the normal storage will be a zero value.
An emergency action plan is defined as a plan of action to be taken to reduce the potential for property damage and loss of life in an area affected by a dam failure or large flood.
|NID ID (National ID)||TX02023|